GXL88 controller can do all that the previous (GX8, GXL8, etc) did, but
ANY change on Inputs, Voltages, Temperatures, Level, Pressure, Time,
etc, can force switch any chosen output(s) and send SMS(s) to any cell
phone or call any phone. All switch and alert levels (thresholds) are
several functions, from simple to specialized, but only a few are
generally needed on most common installations. Non-used functions will
simply be left unprogrammed.
8 Protected Inputs. Low / High level.
Connect to GND or left floating. *
3 Inputs Voltage detector 0 to 15V or
240VAC via adapters.
5 Voltmeters. 1 internal. 3 from 0 to
16V and 1 up to ±80Vdc.
2 Thermometers. 1 internal and 1
external. (up to 4 external thermometers).**
4 Relais OUPUTS of 10A each. One R4
is inverter. ( ±3000W maxi!). *
4 Digitals Outputs low/High levels
(to be selected on the inputs 5 to 8).*
3 Polyvalent, multi purpose analog
sensors inputs (up to 4 sensors).**
3 inputs for 0-5V and (0-10V-50%) or
two 4-20mA probes and/or any other probe.
Inputs and Outputs can be renamed to wanted names (for more meaning on
three multipurpose inputs can
be configured for different kinds of sensors.
very Low/High voltage and current measure etc...
1 Sensitive microphone on board. Can
be activated on alarm or alert.
1 Radio GSM + GPRS global 4 bands and
antenna with 10 feet cable.
1 SIM holder S1(standard) and
SIM S2 optional*. Call
1* Internet server with auto
detect. UTP receptor with controls LEDs.
1* Lithium battery holder + Batt backup for internal clock
1* 32 to 75VDC to 15VDC
converter for sensors power supply.
* Can be
left out if not used/wanted to reduce cost and power...
This controller also adds internet connectivity to the system
and gives access to all the commands online via the PC or smartphone
The whole system, status and configuration, is then visible on one
single screen. You can work
simultaneously via internet and with your mobile phone
Most easy to use, all commands have the same format in both SMS and
internet modes. Help memo is available for each command via SMS and
also Online. The system works on any device, PC or smartphone,
connected to the internet and able to view a web page. No need to
install any program or application! Simply use the navigator of your
choice. Please take a look at the short form manual
POWER METER Measured values are;
Phase and Line Voltage and Intensity, total, active, reactive and
apparent Power, Power factor, frequency and total use in kWh.
This energy meter can also be used stand alone with 1 to 3
The Power Meter can
also be connected to the
GXL88 extended SMS/GPRS/Internet controller. A command to the controller will
immediately reply with all full list of the energy measure, immediately to your cell
phone as SMS or WEB page! The controller can also be easily configured for an
automatic repetitive emission of Energy
. More: English